The first piece of deck was added. First a card template was made and then the deck was cut from 1.5mm plywood. This was glued in place with Titebond III. Once the deck has been completed in the plywood, it will then be covered with planking, giving a total thickness of 3mm.
Templates for the rest of the deck, from which plywood will cut from.
The pictures below show the 1.5mm thick plywood pieces cut to size. To be glued later and then the planking can be added. Initially an edging and uprights that represent the tops of the frames. After that the king plank, which will be 15 mm wide and then the other planks that are 10mm wide.
No comments:
Post a Comment